backНазад к 3/2016
Technical Issues
3/2016 pp. 106-112

Belki zespolone drewniano-szklane - przegląd zagadnienia

pdf Полный текст в pdf


In recent years, there has been carried out an extensive research on the possibilities of the use of glass in combination with other materials as safe surface and members structures. Timber-glass composite I-beams are one of the ideas of built up members with glass as a structural material. Such beams contain glass web and timber flanges. The idea of these beams appeared in 2000. The first serious research and analysis of these beams, in which the glass web is connected to the wooden flanges. The paper focuses on the study of previous studies of timber-glass I-beams. Joints of timber and glass together, differences in stiffness of both materials and capacity in uncracked stage and postcritical load capacity were the main points of the paper. As a summary, the idea of further research on these elements was outlined, resulting from the unrecognized problem of thermal loads, long-term loads and dynamic loads acting on these elements.

Ключевые слова

composite beams, timber structures, glass structures

Библиографический список

1. Blyberg, L., Lang, M., Lundstedt, K., Schander, M., Serrano, E., Silfverhielm, M., Stälhandske, C., Glass, timber and adhesive joints - Innovative load bearing building components, Construction and Building Materials, 2014, 55, pp. 470–478.

2. Blyberg, L., Serrano, E., Timber/Glass adhesively bonded I-beams, Lineaus University, 2010

3. Blyberg, L., Serrano, E., Enquist, B., Sterley, M., Adhesive joints for structural timber/glass applications: Experimental testing and evaluation methods, International Journal of Adhesion & Adhesives, 2012, 35, pp. 76–87.

4. Blyberg, L., Serrano. E., Enquist, B., Sterley, N., Adhesive joints for timber/glass applications - Part 1: Mechanical properties in shear and tension, SP Technical Research Institute of Sweden, 2011.

5. Blyberg, L., Serrano, E., Enquist, B., Sterley, M., Adhesive joints for timber/glass applications - Part 2: Test evaluation based on FE-analyses and contact free deformation measurements, SP Technical Research Institute of Sweden, 2011.

6. Cruz, P., Pequeno, J., Timber-Glass Composite Beams: Mechanical Behaviour and Architectural Solutions, Delft, 2008.

7. Dorn, M., Kozłowski, M., Serrano, M., Design approaches for timber-glass beams, In: Schneider, Jens and Weller, Bernhard (ed.), Glass, facade, energy: Engineered Transparency International Conference at glasstec: Conference on Glass, Glass Technology, Facade Engineering and Solar Energy, 2014, pp. 1–9, Düsseldorf, 2014.

8. Hamm, J., Tragverhalten von Holz und Holzwerkstoffen im statischen Verbund mit Glas, Rozprawa doktorska, École Polytechnique Fédérale de Lausanne, Szwajcaria, 2000.

9. Hamm, J., Development of timber-glass prefabricated structural elements, In: Innovative Wooden Structures and Bridges IABSE, Conference Report 85, Lahti, 2001, pp. 41-46.

10. Hulimka, J., Kozłowski, M., Mechanism of failure and post-breakage strength of hybrid timber-glass beams, Proceedings of the 10th International Conference on New Trends in Statics and Dynamics of Buildings, Slovak Society of mechanics SAS, Bratysława, 2012.

11. Kozłowski, M., Experimental and numerical analysis of hybrid timber-glass beams, Rozprawa doktorska, Politechnika Śląska, Gliwice, 2014.

12. Kozłowski, M., Hulimka, J., Load-bearing capacity of hybrid timber-glass beams, ACEE Journal, 2014, 2, pp. 61–70.

13. Kozłowski, M., Serrano, E., Enquist, B., Experimental investigation on timber-glass composite I-beams, Taylor & Francis Group, Londyn, 2014.

14. Kreher, K., Tragverhalten und Bemessung von Holz-Glas-Verbundträgern unter Berücksichtigung der Eigenspannungen im Glas, Rozprawa doktorska, École Polytechnique Fédérale de Lausanne, Szwajcaria, 2004.

15. Kreher, K., Load introduction with timber. Timber as reinforcement for glued composites (shear-walls, I-beams) structural safety and calculation-model, Portland, 2006.

16. Kreher, K., Netterer, J., Timber-glass-composite girders for a hotel in Switzerland, Structural Engineering International, 2004, 14, pp. 149–151.

17. Pischl, R., Die Berechnung Zusammengesetzter Holzerner Biegetrager auf Grund der Elastischen Verbundtheorie, Rozprawa doktorska, Technischen Hochschule Graz, Austria, 1966.

18. PN-EN 1995-1-1: 2010 Eurokod 5. Projektowanie konstrukcji drewnianych. Cześć 1-1: Postanowienia ogólne. Reguły ogólne i reguły dotyczące budynków, PKN, 2010.

19. Premrov, M., Zlatinek, M., Štrukelj, A., Experimental analysis of load-bearing timber-glass I-beam, Construction of Unique Buildings and Structures, 2014, 4 (19), pp. 11–20.

20. Ungermann, D., Preckwinkel, E., Structural behaviour of hybrid steel-glass beams, TU Delft, 2010, pp. 485-495.

21. Vandebroek, M., Louter, C., Caspeele, R., Ensslen, F., Belis, J., Size effect for the edge strength of glass with cut and ground edge finishing, Engineering Structures, 2014, 79, pp. 96–105.

22. Veer, F., Bos, F.P., Zuidema, J., T. Romein, T., Strength and fracture behaviour of anealed and tempered float glass, Proceedings of the 11th International Conference on Fracture (ICF11). - S.l. : Curran Associates, 2005.

23. Veer, F., Bos, F.P., Zuidema, J., Romein, T., Strenght and Fracture Behaviour of Annealed and Tempered Float Glass, Proceedings of the 11th International Conference on Fracture (ICF11). - S.l. : Curran Associates, 2005.

24. Veer, F., Zuidema, J., The strenght of glass, effect of edge quality, Faculty of Architecture, TU Delft, 2003, , pp. 106-109.

25. Veer, F., Zuidema, J., Bos, F., The strength and failure of glass in bending, TU Delft, 2005,  pp. 1-3.

26. Winter, W., Hochhauser, W., Fadai, A., Timber-glass composite trusses and plates, Poster: World Conference on Timber Engineering WCTE 2012, Auckland, 2012.