backНазад к 1/2017
Technical Issues
1/2017 pp. 34-40

Wybrane zagadnienia oczyszczania powietrza z pyłów powstających podczas produkcji mebli w technologii płyty komórkowej


pdf Полный текст в pdf

Аннотация

The article describes the plants pneumatic extraction systems working in one of the IKEA factories in Poland. Basic data on these installations and pulse-jet bag filters that were working in the individual production lines were collected. Special attention has been paid to technical solutions used in filters. Construction of the filter station and the terms that occur inside the filter as significant factors affecting filtration process were analysed. Presented insights and observations form the basis to determine the connection type and degree of fragmentation of the dust and its conditions of discharge from workstations with dust collectors and built-in solutions in them.

Ключевые слова

pulse-jet filter bag, non-woven filter media, wood dust, dust separation, furniture factory

Библиографический список

1. Calle, S., Contal, P., Thomas, D., Bemer, D., Leclerc, D., Evolutions of efficiency and pressure drop of filter media during clogging and cleaning cycles, Powder Technology, 2002, 128(2), pp. 213–217.

2. Jacobsen, G., Schaumburg, I., Sigsgaard, T., Schlünssen, V., (2010). Non-malignant respiratory diseases and occupational exposure to wood dust. Part II. Dry wood industry, Annals of Agricultural and Environmental Medicine, 2010, 17(1), pp. 29–44.

3. Leith, D., Ellenbecker, M.J., Theory for penetration in a pulse-jet cleaned fabric filter, Journal of the Air Pollution Control Association, 1980, 30(8), pp. 877–881.

4. Leith, D., Ellenbecker, M.J., Theory for pressure drop in a pulse-jet cleaned fabric filter, Atmospheric Environment, 1980, 14(7), pp. 845–852.

5. Mračková, E., Krišťák, Ľ., Kučerka, M., Gaff, M., Gajtanska, M., Creation of Wood Dust during Wood Processing: Size Analysis, Dust Separation, and Occupational Health, BioResources, 2015, 11(1), pp. 209–222.

6. Palmqvist, J., Gustafsson, S.-I., Emission of dust in planing and milling of wood, Holz Als Roh- Und Werkstoff, 1999, 57(3), pp. 164–170. https://doi.org/10.1007/s001070050035.

7. Pałubicki, B., Rogoziński, T., Efficiency of chips removal during CNC machining of particleboard, Wood Research, 2016, 61(5), pp. 811–818.